Analysis of Reject Part Adapter CN-235 (N70)

Authors

  • Sidik Permana Department of Mechanical Engineering Widyatama University Bandung, Indonesia Author
  • Cepi Saepudin Department of Mechanical Engineering Widyatama University Bandung, Indonesia Author
  • Usman Kustaman Department of Mechanical Engineering Widyatama University Bandung, Indonesia Author
  • Ega Purwana Department of Mechanical Engineering Widyatama University Bandung, Indonesia Author
  • Udin Kamarudin Department of Mechanical Engineering Widyatama University Bandung, Indonesia Author

DOI:

https://doi.org/10.61841/0dkv4497

Keywords:

Calyces Geometry, Protocols, Deckal Maho 210 U, Deviations

Abstract

Part CN CN 235 (N70) adapter is a part for the infrared radar sensor seat holder or housing on the aircraft. This part requires high accuracy and there should be no mistakes in the manufacturing process. Analysis of Part Adapter damage is done because there is a discrepancy in the size of zone 30 that is the standard 0.5 micron while the result is 0.7 micron. The analysis was performed using the measurement protocol method on the Deckal Maho machine. The results of measurement analysis on the Deckal Maho machine showed a deviation on the C axis of 24 microns from a tolerance of -20 to 20 microns. Calibration is carried out on the C axis by using calyces geometry measurements and parameter settings for the input data on the Deckal Maho machine monitor. Calibration results on Axis C show deviations of -10 microns, still within tolerance.

 

Downloads

Download data is not yet available.

References

[1] Bambang setiyo H. maintenance management and repair of machinery. Yogyakarta. FT UNY publisher, 2015.

[2] Puspasari, A., Mustomi, D., & Anggraeni, E. (2019). Reject Product Quality Control Process in Quality Control at PT. Yasufuku Indonesia Bekasi. Widya Cipta, 3 (1), 71–78.

[3] Garg, cellphone. Industrial Maintenance. S. Chand & Company Ltd, 1997

[4] Shigeo Shingo. (2015). Quality Control

Downloads

Published

30.09.2020

Issue

Vol. 24 No. 7 (2020): 24 (7) 2020

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Permana, S., Saepudin, C., Kustaman, U., Purwana, E., & Kamarudin, U. (2020). Analysis of Reject Part Adapter CN-235 (N70). International Journal of Psychosocial Rehabilitation, 24(7), 2901-2911. https://doi.org/10.61841/0dkv4497