Analysis of Total Productive Maintenance (Tpm) Implementation Using Overall Equipment Effectiveness (Oee) And Autonomous Maintenance Methods in The Universal Pack 6 Machine
DOI:
https://doi.org/10.61841/yg264q31Keywords:
Productivity, Effectiveness, Autonomous, Maintenance and OEEAbstract
The quality of products from an industry cannot be separated from one indication of the role of equipment. Equipment is one important factor that must be maintained with the implementation of maintenance and repairs. PT. XYZ is a company engaged in the manufacture of nutritional drinks. Problem that can be found at PT. XYZ is the number of breakdowns that occur on the Universal Pack 6 line 7 machine reaching 13.40% of production time. This results in a reduction in the maximum amount of production and results in a lack of effectiveness index value. One of the measurement tools to increase productivity is the measurement of Total Productive Maintenance (TPM) with the calculation of Overall Equipment Effectiveness (OEE). OEE is a systematic method to make improvements in the effectiveness level of the machine or equipment process. This study aims to calculate the OEE value of the Universal Pack 6 line 7 machine, analyzing the OEE value, and determining corrective action with the Autonomous Maintenance approach. Autonomous Maintenance is one of the pillars of TPM (Total Productive Maintenance) by using the principle of independent maintenance by machine operators to increase the knowledge, skills, and responsibilities of production operators related to the machine so that productivity will increase as a whole. The study consists of an activity of real productivity data recapitulation, determining availability rate, performance rate, and quality statistic. Based on the results of the current calculation, it obtains the availability value of 79.16%, performance of 78.26% and quality of 98.71%, while the average OEE value for Universal Pack 6 line 7 machine is 61.15%, this shows that the machine performance is still below standard and corrective action must be taken. To increase the OEE value in Universal Pack 6 line 7, the proposed improvement is to conduct Preventive Maintenance periodically to maintain machine performance, training for operators and supervising operators. After the improvement is made, the availability value of 89.82%, the performance of 78.26%, the quality of 99.35% and the average OEE value of 69.83% (there is an increase of 8.68%.)
Downloads
References
[1] O. Almeanazel, “Total Productive Maintenance Review and Overall Equipment Effectiveness Measurement,” Jordan Journal of
Mechanical and Industrial Engineering, 2010.
[2] Nakajima, Introduction to TPM (Total Productive Maintenance), Cambridge: Productivity Press, Inc., 1988.
[3] A. Corder, Teknik Manajemen Pemeliharaan, Jakarta: Erlangga, 1996.
[4] J. Robert, Total Productive Maintenance, Las Cruses - New Mexico: www.et.nmsu.edu, 1997.
[5] D. Alvira , Y. Helianty dan H. Prassetiyo, “Usulan Peningkatan Overall Equipment Effectiveness (OEE) Pada Mesin Tapping
Manual Dengan Meminimumkan Six Big Losses,” Jurusan Teknik Industri Institut Teknologi Nasional (Itenas) Bandung, vol. 3, 2015.
[6] S. Andika, “Analisis Kerugian Kerja Mesin dengan Menggunakna Metode Overall Equipment Effectiveness,” Skripsi Teknik
Industri Fakultas Teknologi Industri, 2007.
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
