Experimental Study on Aero Hydraulic Clutch

Authors

  • S. Vanangamudi Professor, Department of Automobile Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai. Author
  • C. Thamotharan Department of Automobile Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai Author
  • P. Naveen chandran Professor & Head, Department of Automobile Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai Author
  • S. Prabhakar Associate Professor, Department of Automobile Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai. Author
  • R. Anbazhagan Assistant Professor, Department of Automobile Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai. Author

DOI:

https://doi.org/10.61841/zv2jev27

Keywords:

Hydraulic Clutch, Experimental Study, Clutch Plate.

Abstract

The main objective of this project is to utilize our Ideas, Innovation, Themes, Knowledge, Design Skills, Imagination and Personal Interest in Designing, calculation and fabrication of an “AERO HYDRAULIC CLUTCH” usingcad and Pro-E software’s. The theme for which the A.H.C is to be designed and calculate the proper value would be sketched and rendered on drawing sheets. After the sketches are drawn, the making of 3D model will take place in CAD software’s like AUTOCAD and PRO-E Wildfire. Finally the fabrication model will be ready to complete the work and find out the maximum and minimum force acts on the clutch pedal and clutch. The project work will be 100% success.



Downloads

Download data is not yet available.

References

[1] Das, J., Das, M.P., & Velusamy, P. (2013). Sesbania grandiflora leaf extract mediated green synthesis of antibacterial silver nanoparticles against selected human pathogens. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 104, 265-270.

[2] Umanath, K.P.S.S.K., Palanikumar, K., & Selvamani, S.T. (2013). Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites. Composites Part B: Engineering, 53, 159-168.

[3] Udayakumar, R., Khanaa, V., Saravanan, T., & Saritha, G. (1786). Cross layer optimization for wireless network (WIMAX). Middle-East Journal of Scientific Research, 16(12), 1786-1789.

[4] Kumaravel, A., & Rangarajan, K. (2013). Algorithm for automaton specification for exploring dynamic labyrinths. Indian Journal of Science and Technology, 6(5S), 4554-4559.

[5] Pieger, S., Salman, A., & Bidra, A.S. (2014). Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: a systematic review. The Journal of prosthetic dentistry, 112(1), 22-30.

[6] Vijayaraghavan, K., Nalini, S.K., Prakash, N.U., & Madhankumar, D. (2012). One step green synthesis of silver nano/microparticles using extracts of Trachyspermum ammi and Papaver somniferum. Colloids and Surfaces B: Biointerfaces, 94, 114-117.

[7] Khanaa, V., Mohanta, K., & Satheesh, B. (2013). Comparative study of uwb communications over fiber using direct and external modulations. Indian Journal of Science and Technology, 6(6), 4845-4847.

[8] Khanaa, V., Thooyamani, K.P., & Udayakumar, R. (1798). Cognitive radio based network for ISM band real time embedded system. Middle-East Journal of Scientific Research, 16(12), 1798-1800.

[9] Vijayaraghavan, K., Nalini, S.K., Prakash, N.U., & Madhankumar, D. (2012). Biomimetic synthesis of silver nanoparticles by aqueous extract of Syzygium aromaticum. Materials Letters, 75, 33-35

[10] Caroline, M.L., Sankar, R., Indirani, R.M., & Vasudevan, S. (2009). Growth, optical, thermal and dielectric studies of an amino acid organic nonlinear optical material: l-Alanine. Materials Chemistry and Physics, 114(1), 490-494.

[11] Kumaravel, A., & Pradeepa, R. (2013). Efficient molecule reduction for drug design by intelligent search methods. International Journal of Pharma and Bio Sciences, 4(2), B1023-B1029.

[12] Kaviyarasu, K., Manikandan, E., Kennedy, J., Jayachandran, M., Ladchumananandasiivam, R., De Gomes, U.U., & Maaza, M. (2016). Synthesis and characterization studies of NiO nanorods for enhancing solar cell efficiency using photon upconversion materials. Ceramics International, 42(7), 8385-8394.

[13] Sengottuvel, P., Satishkumar, S., & Dinakaran, D. (2013). Optimization of multiple characteristics of EDM parameters based on desirability approach and fuzzy modeling. Procedia Engineering, 64, 1069-1078.

[14] Anbuselvi S., Chellaram, С., Jonesh S., Jayanthi L., & Edward J.K.P. (2009). Bioactive potential of coral associated gastropod, Trochus tentorium of Gulf of Mannar, Southeastern India. J. Med. Sci, 9(5), 240-244.

[15] Kaviyarasu, K., Ayeshamariam, A., Manikandan, E., Kennedy, J., Ladchumananandasivam, R., Gomes, U.U., & Maaza, M. (2016). Solution processing of CuSe quantum dots: Photocatalytic activity under RhB for UV and visible-light solar irradiation. Materials Science and Engineering: B, 210, 1-9.

[16] Kumaravel, A., & Udayakumar, R. (2013). Web portal visits patterns predicted by intuitionistic fuzzy approach. Indian Journal of Science and Technology, 6(5S), 4549-4553.

[17] Srinivasan, V., & Saravanan, T. (2013). Reformation and market design of power sector. Middle-East Journal of Scientific Research, 16(12), 1763-1767.

[18] Kaviyarasu, K., Manikandan, E., Kennedy, J., & Maaza, M. (2015). A comparative study on the morphological features of highly ordered MgO: AgO nanocube arrays prepared via a hydrothermal method. RSC Advances, 5(100), 82421-82428.

[19] Kumaravel, A., & Udhayakumarapandian, D. (2013). Consruction of meta classifiers for apple scab infections. International Journal of Pharma and Bio Sciences, 4(4), B1207-B1213.

[20] Sankari, S.L., Masthan, K.M.K., Babu, N.A., Bhattacharjee, T., & Elumalai, M. (2012). Apoptosis in cancer-an update. Asian Pacific journal of cancer prevention, 13(10), 4873-4878

[21] Harish, B.N., & Menezes, G.A. (2011). Antimicrobial resistance in typhoidal salmonellae. Indian journal of medical microbiology, 29(3), 223-229.

[22] Manikandan, A., Manikandan, E., Meenatchi, B., Vadivel, S., Jaganathan, S.K., Ladchumananandasivam, R., & Aanand, J.S. (2017). Rare earth element (REE) lanthanum doped zinc oxide (La: ZnO) nanomaterials: synthesis structural optical and antibacterial studies. Journal of Alloys and Compounds, 723, 1155-1161.

[23] Caroline, M.L., & Vasudevan, S. (2008). Growth and characterization of an organic nonlinear optical material: L-alanine alaninium nitrate. Materials Letters, 62(15), 2245-2248.

[24] Saravanan T., Srinivasan V., Udayakumar R. (2013). A approach for visualization of atherosclerosis in coronary artery. Middle - East Journal of Scientific Research, 18(12), 1713-1717.

[25] Poongothai, S., Ilavarasan, R., & Karrunakaran, C.M. (2010). Simultaneous and accurate determination of vitamins B1, B6, B12 and alpha-lipoic acid in multivitamin capsule by reverse-phase high performance liquid chromatographic method. International Journal of Pharmacy and Pharmaceutical Sciences, 2(4), 133-139.

[26] Udayakumar, R., Khanaa, V., & Saravanan, T. (2013). Synthesis and structural characterization of thin films of SnO 2 prepared by spray pyrolysis technique. Indian Journal of Science and Technology, 6(6), 4754-4757

[27] Anbazhagan, R., Satheesh, B., & Gopalakrishnan, K. (2013). Mathematical modeling and simulation of modern cars in the role of stability analysis. Indian Journal of Science and Technology, 6(5S), 4633-4641.

[28] Caroline, M.L., & Vasudevan, S. (2009). Growth and characterization of bis thiourea cadmium iodide: A semiorganic single crystal. Materials Chemistry and Physics, 113(2-3), 670-674.

[29] Sharmila, S., Jeyanthi Rebecca, L., & Das, M.P. (2012). Production of Biodiesel from Chaetomorpha antennina and Gracilaria corticata. Journal of Chemical and Pharmaceutical Research, 4(11), 4870-4874.

[30] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2013). An integrated agent system for e-mail coordination using jade. Indian Journal of Science and Technology, 6(6), 4758-4761.

[31] Caroline, M.L., Kandasamy, A., Mohan, R., & Vasudevan, S. (2009). Growth and characterization of dichlorobis l-proline Zn (II): A semiorganic nonlinear optical single crystal. Journal of Crystal Growth, 311(4), 1161-1165.

[32] Caroline, M.L., & Vasudevan, S. (2009). Growth and characterization of L-phenylalanine nitric acid, a new organic nonlinear optical material. Materials Letters, 63(1), 41-44.

[33] Kaviyarasu, K., Xolile Fuku, Genene T. Mola, E. Manikandan, J. Kennedy, and M. Maaza. Photoluminescence of well-aligned ZnO doped CeO2 nanoplatelets by a solvothermal route. Materials Letters, 183(2016), 351-354.

[34] Saravanan, T., & Saritha, G. (2013). Buck converter with a variable number of predictive current distributing method. Indian Journal of Science and Technology, 6(5S), 4583-4588.

[35] Parthasarathy, R., Ilavarasan, R., & Karrunakaran, C. M. (2009). Antidiabetic activity of Thespesia Populnea bark and leaf extract against streptozotocin induced diabetic rats. International Journal of PharmTech Research, 1(4), 1069-1072.

[36] Hanirex, D.K., & Kaliyamurthie, K. P. (2013). Multi-classification approach for detecting thyroid attacks.

International Journal of Pharma and Bio Sciences, 4(3), B1246-B1251

[37] Kandasamy, A., Mohan, R., Lydia Caroline, M., & Vasudevan, S. (2008). Nucleation kinetics, growth, solubility and dielectric studies of L‐proline cadmium chloride monohydrate semi organic nonlinear optical single crystal. Crystal Research and Technology: Journal of Experimental and Industrial Crystallography, 43(2), 186-192.

[38] Srinivasan, V., Saravanan, T., Udayakumar, R., & Saritha, G. (2013). Specific absorption rate in the cell phone user’s head. Middle-East Journal of Scientific Research, 16(12), 1748-50.

[39] Udayakumar R., Khanaa V., & Saravanan T. (2013). Chromatic dispersion compensation in optical fiber communication system and its simulation. Indian Journal of Science and Technology, 6(6), 4762-4766.

[40] Vijayaragavan, S.P., Karthik, B., Kiran, T.V.U., & Sundar Raj, M. (1990). Robotic surveillance for patient care in hospitals. Middle-East Journal of Scientific Research, 16(12), 1820-1824.

[41] Elijah, Aiden, (2018). Co-Clustering based Cross-Domain Text Classification Algorithm with Semantic ANALYSIS for Wikipedia.Journal of Computational Information Systems, 14(3), 44 - 49.

[42] Asim, M., Gopalia, R., & Swar, S.(2014). Comparison of Methods for Solving Travelling Salesmen Problem.International Journal of Advances in Engineering and Emerging Technology, 5(2), 80-87.

[43] Kowsalya, P., & Rajhitha, G. (2015). Design and Implementation of AMI System for High Traffic Smart Grid Applications using ZigBee. Excel International Journal of Technology, Engineering and Management, 2(1), 14-18.

[44] Skaria, B., Dr. John, E.T., & Shajan, P.X. (2016). Literature Review on Web Mining. Bonfring International Journal of Data Mining, 6(1), 04-06.

[45] Moravej, Z., Behravesh, V., & Bagheri, S. (2015). Optimal PMU Placement for Power System Using Binary Cuckoo Search Algorithm. International Academic Journal of Innovative Research, 2(10), 8-19.

[46] Retheesh, D. (2014). Analysis on FPGA Designs of Parallel High Performance Multipliers. International Journal of Communication and Computer Technologies, 2(1), 11-18.

[47] Khan, A., & Dr. Khushnood, S. (2017). Simple and Efficient Blood Glucose Measurement Technique Using Non Invasive Artificial Intelligence. Bonfring International Journal of Industrial Engineering and Management Science, 7(1), 09-13.

[48] Omidvar, R. (2015). OOSP (Off-On Sources Problem). International Academic Journal of Science and Engineering, 2(5), 22-31.

[49] Rajalakshmi, J., (2014). Implantable CPW Fed X-Shaped Monopole Antenna for Biomedical Application.

International Journal of System Design and Information Processing, 2(1), 23-26.

[50] Kaveen, P., & Dr.Singaravel, G. (2018). Simulation of Efficient Life-Time in Clustering Approaches for New Approach in Wireless Sensor Network. Bonfring International Journal of Networking Technologies and Applications, 5(1), 1-2.

Downloads

Published

31.08.2018

Issue

Vol. 22 No. 3 (2018): 22 (3) 2018

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

How to Cite

Vanangamudi, S., Thamotharan, C., Naveen chandran, P., Prabhakar, S., & Anbazhagan, R. (2018). Experimental Study on Aero Hydraulic Clutch. International Journal of Psychosocial Rehabilitation, 22(3), 67-72. https://doi.org/10.61841/zv2jev27