Modification of the Barrel Register Full Adder (BRFA) for Performance of Montgomery Modular Multipliers
DOI:
https://doi.org/10.61841/7jd4av90Keywords:
Parallel Prefix Addition, Energy-efficient Architecture, Gated Clock, Montgomery Modular Multiplier, Rivest, Shamir and Adleman (RSA) cryptosystemAbstract
Power utilization and region are the two compels which confines the use of crucial open cryptosystem in useful gadgets. This paper proposes a plan for RSA framework which is accomplished by rehashed secluded augmentations on substantial numbers. Fast Montgomery particular duplication calculations and comparing equipment designs have a parallel prefix snake. A useful vitality calculation is utilized to diminish the vitality utilization and furthermore improve further the throughput of Montgomery measured multipliers. This engineering can sidestep the pointless parallel expansion and register to compose activities, which prompts less vitality utilization and higher performance. The alteration of the Barrel Register Full Adder (BRFA) is done as such as to apply the twofold gated clock plan procedure further decrease of vitality utilization of capacity components in BRFA.
Downloads
References
[1] Rajesh E., Sankari L., Malathi L., Krupaa J.R., Naturally occurring products in cancer therapy, Journal of Pharmacy and Bioallied Sciences, V-7, PP:S181-S183, 2015.
[2] Vanangamudi S., Prabhakar S., Thamotharan C., Anbazhagan R., Dual fuel hybrid bike, Middle - East Journal of Scientific Research, V-20, I-12, PP:1819-1822, 2014.
[3] Brindha G., Krishnakumar T., Vijayalatha S., Emerging trends in tele-medicine in rural healthcare, International Journal of Pharmacy and Technology, V-7, I-2, PP:8986-8991, 2015.
[4] Sharmila S., Jeyanthi Rebecca L., Naveen Chandran P., Kowsalya E., Dutta H., Ray S., Kripanand N.R., Extraction of biofuel from seaweed and analyse its engine performance, International Journal of Pharmacy and Technology, V-7, I-2, PP:8870-8875, 2015.
[5] Thooyamani K.P., Khanaa V., Udayakumar R., Using integrated circuits with low power multi bit flip-flops in different approch, Middle - East Journal of Scientific Research, V-20, I-12, PP:2586-2593, 2014.
[6] Jeyanthi Rebecca L., Sharmila S., Das M.P., Seshiah C., Extraction and purification of carotenoids from vegetables, Journal of Chemical and Pharmaceutical Research, V-6, I-4, PP:594-598, 2014.
[7] Udayakumar R., Khanaa V., Saravanan T., Saritha G., Retinal image analysis using curvelet transform and multistructure elements morphology by reconstruction, Middle - East Journal of Scientific Research, V-16, I-12, PP:1781-1785, 2013.
[8] Karthik B., Kiran Kumar T.V.U., EMI developed test methodologies for short duration noises, Indian Journal of Science and Technology, V-6, I-SUPPL5, PP:4615-4619, 2013.
[9] Bomila R., Srinivasan S., Gunasekaran S., Manikandan A., Enhanced photocatalytic degradation of methylene blue dye, opto-magnetic and antibacterial behaviour of pure and la-doped ZnO nanoparticles, Journal of Superconductivity and Novel Magnetism, V-31, I-3, PP:855-864, 2018.
[10] Manikandan A., Mani M.P., Jaganathan S.K., Rajasekar R., Jagannath M., Formation of functional nanofibrous electrospun polyurethane and murivenna oil with improved haemocompatibility for wound healing, Polymer Testing, V-61, PP:106-113, 2017.
[11] Saravanan T., Sundar Raj M., Gopalakrishnan K., Comparative performance evaluation of some fuzzy and classical edge operators, Middle - East Journal of Scientific Research, V-20, I-12, PP:2633-2633, 2014.
[12] Karthik B., Kiran Kumar T.V.U., Authentication verification and remote digital signing based on embedded arm (LPC2378) platform, Middle - East Journal of Scientific Research, V-20, I-12, PP:2341-2345, 2014.
[13] Gopalakrishnan K., Sundar Raj M., Saravanan T., Multilevel inverter topologies for high-power applications, Middle - East Journal of Scientific Research, V-20, I-12, PP:1950-1956, 2014.
[14] Sakthipriya N., An effective method for crop monitoring using wireless sensor network, Middle - East Journal of Scientific Research, V-20, I-9, PP:1127-1132, 2014.
[15] Vijayaragavan S.P., Karthik B., Kiran Kumar T.V.U., Effective routing technique based on decision logic for open faults in fpgas interconnects, Middle - East Journal of Scientific Research, V-20, I-7, PP:808-811, 2014.
[16] Kanniga E., Selvaramarathnam K., Sundararajan M., Kandigital bike operating system, Middle - East Journal of Scientific Research, V-20, I-6, PP:685-688, 2014.
[17] Sundararajan M., Optical instrument for correlative analysis of human ECG and breathing signal, International Journal of Biomedical Engineering and Technology, V-6, I-4, PP:350-362, 2011.
[18] Khanaa V., Thooyamani K.P., Saravanan T., Simulation of an all optical full adder using optical switch, Indian Journal of Science and Technology, V-6, I-SUPPL.6, PP:4733-4736, 2013.
[19] Slimani Y., Baykal A., Amir M., Tashkandi N., Güngüneş H., Guner S., El Sayed H.S., Aldakheel F., Saleh T.A., Manikandan A., Substitution effect of Cr 3+ on hyperfine interactions, magnetic and optical properties of Sr-hexaferrites, Ceramics International, V-44, I-13, PP:15995-16004, 2018.
[20] Suguna S., Shankar S., Jaganathan S.K., Manikandan A., Novel Synthesis of Spinel Mn x Co 1−x Al 2 O 4 (x = 0.0 to 1.0) Nanocatalysts: Effect of Mn 2+ Doping on Structural, Morphological, and Opto-Magnetic Properties, Journal of Superconductivity and Novel Magnetism, V-30, I-3, PP:691-699, 2017.
[21] Mathubala G., Manikandan A., Arul Antony S., Ramar P., Enhanced photocatalytic activity of spinel CuxMn1-xFe2O4 nanocatalysts for the degradation of methylene blue dye and opto-magnetic properties, Nanoscience and Nanotechnology Letters, V-8, I-5, PP:375-381, 2016.
[22] Kumaravel A., Dutta P., Application of Pca for context selection for collaborative filtering, Middle - East Journal of Scientific Research, V-20, I-1, PP:88-93, 2014.
[23] Krishnamoorthy P., Jayalakshmi T., Preparation, characterization and synthesis of silver nanoparticles by using phyllanthusniruri for the antimicrobial activity and cytotoxic effects, Journal of Chemical and Pharmaceutical Research, V-4, I-11, PP:4783-4794, 2012.
[24] Amir M., Gungunes H., Slimani Y., Tashkandi N., El Sayed H.S., Aldakheel F., Sertkol M., Sozeri H., Manikandan A., Ercan I., Baykal A., Mössbauer Studies and Magnetic Properties of Cubic CuFe 2 O 4 Nanoparticles, Journal of Superconductivity and Novel Magnetism, V-32, I-3, PP:557-564, 2019.
[25] Raj M.S., Saravanan T., Srinivasan V., A modified direct torque control of induction motor using space vector modulation technique, Middle - East Journal of Scientific Research, V-20, I-11, PP:1572-1574, 2014.
[26] Khanaa V., Thooyamani K.P., Using triangular shaped stepped impedance resonators design of compact microstrip quad-band, Middle - East Journal of Scientific Research, V-18, I-12, PP:1842-1844, 2013.
[27] Asiri S., Sertkol M., Güngüneş H., Amir M., Manikandan A., Ercan I., Baykal A., The Temperature Effect on Magnetic Properties of NiFe 2 O 4 Nanoparticles, Journal of Inorganic and Organometallic Polymers and Materials, V-28, I-4, PP:1587-1597, 2018. Thaya R., Malaikozhundan B., Vijayakumar S., Sivakamavalli J., Jeyasekar R., Shanthi S., Vaseeharan B., Ramasamy P., Sonawane A., Chitosan coated Ag/ZnO
nanocomposite and their antibiofilm, antifungal and cytotoxic effects on murine macrophages, Microbial Pathogenesis, V-100, PP:124-132, 2016.
[28] Kolanthai E., Ganesan K., Epple M., Kalkura S.N., Synthesis of nanosized hydroxyapatite/agarose powders for bone filler and drug delivery application, Materials Today Communications, V-8, PP:31-40, 2016.
[29] Thilagavathi P., Manikandan A., Sujatha S., Jaganathan S.K., Antony S.A., Sol-gel synthesis and characterization studies of NiMoO 4 nanostructures for photocatalytic degradation of methylene blue dye, Nanoscience and Nanotechnology Letters, V-8, I-5, PP:438-443, 2016.
[30] Thamotharan C., Prabhakar S., Vanangamudi S., Anbazhagan R., Anti-lock braking system in two wheelers, Middle - East Journal of Scientific Research, V-20, I-12, PP:2274-2278, 2014.
[31] Thamotharan C., Prabhakar S., Vanangamudi S., Anbazhagan R., Coomarasamy C., Hydraulic rear drum brake system in two wheeler, Middle - East Journal of Scientific Research, V-20, I-12, PP:1826-1833, 2014.
[32] Vanangamudi S., Prabhakar S., Thamotharan C., Anbazhagan R., Collision control system in cars, Middle - East Journal of Scientific Research, V-20, I-12, PP:1799-1809, 2014.
[33] Vanangamudi S., Prabhakar S., Thamotharan C., Anbazhagan R., Drive shaft mechanism in motor cycle, Middle - East Journal of Scientific Research, V-20, I-12, PP:1810-1815, 2014.
[34] Anbazhagan R., Prabhakar S., Vanangamudi S., Thamotharan C., Electromagnetic engine, Middle - East Journal of Scientific Research, V-20, I-3, PP:385-387, 2014.
[35] Kalaiselvi V.S., Prabhu K., Ramesh M., Venkatesan V., The association of serum osteocalcin with the bone mineral density in post menopausal women, Journal of Clinical and Diagnostic Research, V-7, I-5, PP:814- 816, 2013.
[36] Kalaiselvi V.S., Saikumar P., Prabhu K., Prashanth Krishna G., The anti Mullerian hormone-a novel marker for assessing the ovarian reserve in women with regular menstrual cycles, Journal of Clinical and Diagnostic Research, V-6, I-10, PP:1636-1639, 2012.
[37] Thanigai Arul K., Manikandan E., Ladchumananandasivam R., Maaza M., Novel polyvinyl alcohol polymer based nanostructure with ferrites co-doped with nickel and cobalt ions for magneto-sensor application, Polymer International, V-65, I-12, PP:1482-1485, 2016.
[38] Das M.P., Kumar S., An approach to low-density polyethylene biodegradation by Bacillus amyloliquefaciens, 3 Biotech, V-5, I-1, PP:81-86, 2015.
[39] Vanangamudi S., Prabhakar S., Thamotharan C., Anbazhagan R., Turbo charger in two wheeler engine, Middle - East Journal of Scientific Research, V-20, I-12, PP:1841-1847, 2014.
[40] Vanangamudi S., Prabhakar S., Thamotharan C., Anbazhagan R., Design and calculation with fabrication of an aero hydraulwicclutch, Middle - East Journal of Scientific Research, V-20, I-12, PP:1796-1798, 2014.
[41] Zain, Z. (2019). High Speed and Low Power GDI based Full Adder. Journal of VLSI Circuits and Systems, 1(1), 5-9.
[42] Udupa, P., & Vishwakarma, S. (2016). A Survey of MRI Segmentation Techniques for Brain Tumor Studies. Bonfring International Journal of Advances in Image Processing, 6(3), 22-27.
[43] Jacob, L., & Quinn, S. (2018). Finding of Frequent Itemset with Two Mask Searches. Journal of Computational Information Systems, 14(2), 36-43.
[44] Manjula, S., & Dr. Banu, R., (2014).An Efficient Compound Scoring Gene Selection Technique (CSGS) for Cancer Classification using Microarrays. International Journal of Advances in Engineering and Emerging Technology, 5(5), 234-247.
[45] Saravanan, G., and Dr.Gopalakrishnan, V. (2014). Resource Allocation for Multimedia Communication on Grid Computing Environment using Hybrid ABC. Excel International Journal of Technology, Engineering and Management, 1(2), 36-41.
[46] Dr. John, E.T., Skaria, B., & Shajan, P.X. (2016). An Overview of Web Content Mining Tools. Bonfring International Journal of Data Mining, 6(1), 01-03.
[47] Alviri, F., & Habibi, S.F. (2015). Reviewing Self-Adaptation Frameworks for the Implementation of Enterprise Resource Planning Systems. International Academic Journal of Innovative Research, 2(4), 1-10.
[48] Soni, K., Kumar, U., & Dosodia, P. (2014). A Various Biometric Application for Authentication and Identification. International Journal of Communication and Computer Technologies, 2(1), 6-10.
[49] Dr.Sebasthirani, K., and Mahalingam, G. (2018). Design of Shunt Active Power Filter with Fuzzy Logic Control for Mitigating Harmonics. Bonfring International Journal of Industrial Engineering and Management Science, 8(2), 26-30.
[50] Asgarnezhad, R., & Mohebbi, K. (2015). A Comparative Classification of Approaches and Applications in Opinion Mining. International Academic Journal of Science and Engineering, 2(5), 1-13.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
