Training on the Pneumatic Work with Petroleum Patients within the Preliminary and Practical Way
DOI:
https://doi.org/10.61841/376jee86Keywords:
Cotton, Pneumotransport, Pipe, Transmission, Failure, Shock, Transmit a Principle.Abstract
The article describes the change in cotton density transmitted during pneumatic pipe transfer in time unit, ie irregularity of transmission, movement of the cotton lining to the pneumatic tube and the pipe movement and its movement in the piped wavy traverse and the collision with the pipe wall. In order to minimize negative impacts on cotton quality, it has been argued that it is best to transfer cotton at a reasonable rate, in the plain corresponding to the center of the pipe and at the same speed as the current flow rate.
Downloads
References
[1] Sarimsakov O. Ruzmetov M. Dynamics of the interaction of the worker organs with cotton in the cotton- bulletproof machine // J.Total problems. 2016, №4, P.31-34
[2] Mardanov B., Sarimsakov O., Theoretical study of the process of mechanical breakdown of cotton seeds.//
J.FarPI. 2017, No. 1, P.125-127
[3] Sarimsakov O. Improvement of the cotton transportation and air transportation. Monographs. Navruz publishing house, Namangan, 2019.
[4] Sarimsakov O. D.Turgunov, A.Isakjanov. Practical study of process of transfer of cotton raw material to pneumatic transport // Scientific-technical journal NMTI, №3-4, 2018, 37-41 page
[5] Abbazov I., O. Sarimsakov, M. Khodjiev, B.Mardonov. Waste Produced at Cotton Waste Factories. //
American Joural ASCIT Communications. 2018; 5 (2): pp.22-28
[6] Kholmirzaev F., Azimov S. Abdurahimov K., Sarimsakov O. Investigation of the Loss of Air Pressure in Pipeline of the Sotton Pneumatic Conveying.// Saudi Journal of Engineering and Technology // Dubai,
United Arab Emirates. February 2019; 4 (2): pp.23-27
[7] Obidov A., Akhmedkhodjaev Kh., Sarimsakov O., Holikov Q. Investigation of the Properties of Fibrous Cotton Seeds, for Sorting on a Mesh Surface. // Scientific Reasearch Publishing. USA. J.Enjineering. 2018,10, pp. 572-578.
[8] Sarimsakov O. The possibility of reducing cotton consumption in cotton. // American Journal of Science and Technology .// 2016; 4 (6): pp.68-72. http: www.aascit.journal / ajst.
[9] Sarimsakov O., Gaybnazarov E. About energy consumption in pneumatic conveying of raw cotton.
American Journal of Energy and Power Engineering.vol.3, No.4,2016, pp.26-29. 2017.
[10] Sarimsakov O., C. Khusanov, R. Muradov. The Change of Air Pressure Along the Pipeline Installation for Pneumatic Conveying Raw Cotton.// J. Engineering and Technology //. 2016; 3 (5): pp.89-92
[11] Abdukarimovich, M.O., Ibragimovich, A.K. and Sharipjanovich, S.O. (2018) Cylinder for Pneumomechanical Spinning Machines. Engineering, 10, pp. 345-356.
[12] Sarimsakov O., I.Tursunov, N. Rejapova, B. Mardonov The movement of a mixture of cotton with an air stream during pneumatic transport by pipeline of variable cross section// J. Enjineering. Scientific Research Publishing. USA. (Web of Science ind.) 11(08):531-540, January 2019
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
