Manufacturing of Aluminium Metal Matrix Composite after Critical Study
DOI:
https://doi.org/10.61841/jw4j3206Keywords:
Aluminium Metal,, Manufacturing, Silicon Carbide, Tensile, Matrix Composite.Abstract
Aluminium matrix composites are giving such predominant properties which can't be accomplished by any current solid material. Properties of Aluminium matrix composite are profoundly affected by nature of fortification which can be either in constant or spasmodic fiber structure. Aluminium metal matrix composites are increasing boundless acknowledgment for some other industrial applications in view of their basic properties, for example, high quality, low thickness, and great wear opposition contrasted with some other metal. The outcome demonstrated that the created technique is very effective and there is an expansion in the estimation of rigidity with increment in weight level of Silicon Carbide.
Downloads
References
[1] Girija Moona, RS Walia, Vikas Rastogi & Rina Sharma. “Aluminium metal matrix composites: A retrospective investigation”, Indian Journal of Pure & Applied Physics Vol. 56, February 2018, pp. 164- 175
[2] Prof. Mr. Amol Mali, Mr. Sourabh Kherde, Mr. Indranil Sutar, Mr. Sagar Wani, Mr. Shubham Dhodare, “A Review Paper on Study of Aluminium Matrix Composite”, International Research Journal of Engineering and Technology (IRJET), Volume: 05 Issue: 05 | May-2018
[3] Shriyash S. Shinde, S.G. Kulkarni, S.S. Kulkarni, “Manufacturing of Aluminium Matrix Composite Using Stir Casting Method”, Novateur Publications International Journal of Innovations in Engineering Research and Technology [IJIERT] ISSN: 2394-3696 Volume 2, Issue 5, May-2015
[4] A. Włodarczyk-Fligier, L.A. Dobrzański, M. Kremzer, M. Adamiak, “Manufacturing of aluminium matrix composite materials reinforced by Al2O3 particles”, Journal of Achievements in Materials and Manufacturing Engineering, Volume 27 Issue 1 March 2008
[5] Saravanan S, Senthilkumar P, Ravichandran M, Anandakrishnan V and Balan AV, “Processing of Aluminium Metal Matrix Composites - A Review”, Journal of Manufacturing Engineering, September, 2017, Vol. 12, Issue. 3, pp 130-141
[6] C. Parswajinan, B. Vijaya Ramnath, S. Abishek, B. Niharishsagar, G.Sridhar, “Hardness and impact behaviour of aluminium metal matrix composite”, The 3rd International Conference on Materials and Manufacturing Engineering 2018 IOP Publishing IOP Conf. Series: Materials Science and Engineering 390 2018 012075, doi:10.1088/1757-899X/390/1/012075
[7] Rajeshkumar Gangaram Bhandare and Parshuram M. Sonawane, “Preparation of Aluminium Matrix Composite by using Stir Casting Method & it’s Characterization”, International Journal of Current Engineering and Technology ISSN 2277 - 4106 © 2014 INPRESSCO. All Rights Reserved. Available at http://inpressco.com/category/ijcet, Accepted 12 March 2014, Available online 01 April 2014, Special
Issue-3, April 2014
[8] Mandar Valsange, S.G. Kulkarni, S.A. Sonawane. “Stir Casting used in manufacturing of Aluminium Matrix Composite”, International Journal for Research in Technological Studies in August 2014, Vol. 1, Issue 9.
[9] Muhammad Hayat Jokhio, Muhammad Ibrahim Panhwar, And Mukhtiar Ali Unar, “Manufacturing of aluminium composite material using stir casting process”, Mehran University Research Journal of Engineering & Technology 2011, Volume 30, No. 1, [Issn 0254-7821]
[10] G. Ramakrishnan , Vijaya Ramnath B, Naveen E, Gowtham S, Arun Kumar A, Muthuvel M.S and Akil R,” A review on aluminium metal matrix composites”, Advanced Science, Engineering and Medicine Volume 10, 2018, Pages 1-4.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
