Dual Band RFID-Based for Optimizing Arowana Breading
DOI:
https://doi.org/10.61841/sp49zm36Keywords:
embedded system, RFID, intelligent system,, Arowana applications.Abstract
Arowana has made the highest contributor to the country’s ornamental fish with export contribution RM24 millions in 2014. Government expected to contribute a minimum of RM600 million to the gross domestic product by end 2020. An intelligent device is imperative for cost effective to monitor and control the production environment in real time manner. The government encourages developing the best Arowana breeding method. Thus, Arowana farm demand in detecting the active male Arowana to ensure Arowana breeding process is efficient. Arowana farm suffered losses of RM360,000 for 1 fish in a month and time wasted because the reader falls off hands and drowned when the workers are trying to detect the Arowana due to the existing handheld is not intelligent enough and short of capability over water detection for implant tags. The main purpose of this research is to design and develop the intelligent portable reader by using embedded RFID technology that capable to detect the active male to be segregated because the active male will incubates eggs in the mouth and rise to the surface at night. Arowana is a carnivorous fish therefore before the eggs hatch, the active male mouth brooders must be segregated from other Arowana. The fry are faced with the threat from other Arowana if not segregate. Thus, an intelligent radio frequency (RF) portable reader meets the active male mouth brooder detection demand from Arowana farm with the capability of detecting implant tag from outside of the water area. The developed prototype shows that the capabilty of detection for the outdoor setting, it was observed that the maximum distance between the two nodes for the power level of P0 was 160 meters.
Downloads
References
1. Automation Control: A Survey,” Int. J. Intell. Control Syst, 2011.
2. C. M. El Amine, O. Mohamed, and B. Boualam, “The implementation of indoor localization based on an experimental study of RSSI using a wireless sensor network,” Peer-to- Peer Netw. Appl., 2015.
3. C. Z. Zulkifli, R. M. T. Abdulla, and W. Ismail,“Wireless Mesh Network in Integrated Web Base Monitoring
4. D. Lee and J. Park, “RFID-enabled Supply Chain Traceability : Existing Methods , Applications and Challenges,” no. February, 2010.
5. D. Rodenas-Herraiz, A. J. Garcia- Sanchez, F. Garcia-Sanchez, and J. Garcia-Haro, “Current trends in wireless mesh sensor networks: A review of competing approaches,” Sensors (Switzerland), vol. 13, no. 5,
pp. 5958–5995, 2013.
6. Neelam Singla, Sunyana Jain, Monica Kachroo, Ashima Gakhar. "Review on Functions of Dietary Agents and Plants in Cancer Prevention and Treatment." Systematic Reviews in Pharmacy 4.1 (2013), 31-39. Print. doi:10.4103/0975-8453.135840
7. G. Zhao, “Wireless Sensor Networks for Industrial Process Monitoring and Control: A Survey,” Netw. Protoc. Algorithms, vol. 3, no. 1, pp. 46–63, 2011.
8. G. W. Wendy, “Wireless Mesh Networks in Intelligent Building
9. K. B, “RFID – The Best Technology in Supply Chain Management,” Acad. Journals, vol. 1, no. 2, 2010.
10. M. A. A. Imran Edzereiq Kamarudin and Z. R. M. Azmi, “Experimental Analysis on Available Bandwidth Estimation Tools for Wireless Mesh Network,” Adv. Comput. Commun. Eng. Technol., vol. 315, 2015.
11. M. A. S. M. R. Wan Fatin Fatihah Yahya , Noor Maizura Mohamad Noor, Mohd Pouzi Hamzah, Mohamad Nor Hassan, Nur Fadila Akma Mamat, “Integrating e- Learning with Radio Frequency Identification (RFID) for Learning Disabilities: A Preliminary Study,” Adv. Comput. Commun. Eng. Technol., vol. Volume 315, p. pp 895–903, 2015.
12. M. H. A. . W. and S. N. A. B. M. K. Herdawatie Bt Abdul Kadir, “Boarding School Students Monitoring Systems ( E-ID ) Using Radio Frequency Identification,” vol. 5, no. 3, pp. 206–211, 2009.
13. M. Helmy, A. Wahab, H. A. Kadir, and Z. Tukiran, “RFID-Based Equipment Monitoring System,” 2006.
14. N. A. Anir, M. D. N. M. H. Nizam, and A. Masliyana, “The users perceptions and opportunities in Malaysia in introducing RFID system for Halal food tracking,” WSEAS Trans. Inf. Sci. Appl., vol. 5, no. 5, pp. 843– 852, 2008.
15. R. M. T. Abdullah, “Design and implementation of multi-hop active RFID system with embedded wireless sensor network,” 2012.
16. R. Y. Zhong, G. Q. Huang, T. Zhang, T. Y. Luo, and D. P. Lin, “A Real- time Planning and Scheduling Model in RFID-enabled Manufacturing,” 2014.
17. S. Chaudhari, G. Technology, and C. Volume, “Solution for Zigbee Applications,” Element 14, vol. 1, no. July, pp. 1–26, 2011. Systems for Production Line Automation,” Springer Berlin Heidelb., vol. 62, pp. 7–15, 2012.
18. Kavetsou, e. & detsi, . A. (2016) ionic liquids as solvents and catalysts for the green synthesis of coumarins. Journal of Critical Reviews, 3 (3), 50-55.
19. T. Qu, H. D. Yang, G. Q. Huang, Y. F. Zhang, H. Luo, and W. Qin, “A case of implementing RFID-based real-time shop-floor material management for household electrical appliance manufacturers,” J. Intell. Manuf., vol. 23, no. 6, pp. 2343– 2356, Nov. 2010.
20. W. N. & Q. G. Zhiyuan Zhua*, Jie Tana, He Rena,“RFID application in manufacturing: A case study on a pilot RFID project in household appliance production,” Int. J. Comput. Integr. Manuf., vol. 25, no. 1, pp. 3– 10, 2012.
21. W. Lu, G. Q. Huang, and H. Li, “Scenarios for applying RFID technology in construction project management,” Autom. Constr., vol. 20, no. 2, pp. 101–106, Mar. 2011.
22. Y. Zhang, P. Jiang, G. Huang, T. Qu, G. Zhou, and J. Hong, “RFID-enabled real-time manufacturing information tracking infrastructure for extended enterprises,” J. Intell. Manuf., vol. 23, no. 6, pp.2357–2366, Nov. 2010.
23. Z. Jingyi, L. Xi, and X. Quansheng, “Multi-hop routing for energy- efficiency enhancement in relay-assisted device-to-device communication,” J. China Univ. Posts Telecommun., vol. 22, no. 2, pp. 1–51, 2015.
24. Sohrabi, Y., Nafez, A.H., Yarmohammadi, A., Mirzaei, N., Ahmadpour, M., Saleh, E., Ghadiri, S.K., Adabi, S.Investigation of the peroxide value of oils used in bistros (West of Iran)(2018) International Journal of Pharmaceutical Research, 10 (3), pp. 354-359.
25. Zhang Shun-Yi Tan Ling, “A review of mesh network,” pp. 1–2, 2010.
26. Archana Lal, P. (2014). A Neural Network Based Analysis of Altered Fingerprints. International Scientific Journal on Science Engineering & Technology, 17(9), 863-868.
27. AlaguPandian, P.,Sakthivel, K., Sheik Alavudeen, K., &R.LakshmiPriya. R. (2017). A Low Power Efficient Design of Full Adder Using Transmission Gate. International Journal of Communication and Computer Technologies, 5(1), 1-5.
28. Song, D.Incompatibility between quantum theory and consciousness (2008) NeuroQuantology, 6 (1), pp. 46-
52.
29. Hu, H., Wu, M.Concerning spin as mind-pixel how mind interacts with the brain through electric spin effects(2008) NeuroQuantology, 6 (1), pp. 26-31.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
