EXPERIMENTAL INVESTIGATION OF WELD CHARACTERISTICS FOR A MIG WELDING WITH STAINLESS STEEL OF GRADE SS 410
DOI:
https://doi.org/10.61841/y8k82y67Keywords:
experimental investigation of weld characteristics for a mig welding with stainless steel of grade SS 410Abstract
This review focuses on the study of MIG welding on stainless steel 410. During this study, the properties of MIG are used to weld stainless steel 410. Welding is widely employed by manufacturing engineers and production personnel to quickly and effectively set up manufacturing processes for brand-spanking new products. The MIG welding parameters are the foremost important factors affecting the quality, productivity, and price of welding. This paper presents the influence of welding parameters like welding current, welding voltage, gas flow, wire feed rate, etc. on weld strength, ultimate lastingness, hardness of weld joints, and weld pool geometry of varied metal materials during welding. By using the DOE method, the parameters are often optimized, having the simplest parameter combination for target quality. The analysis from the DOE method can show the importance of the parameters because it gives an effect to vary the standard and strength of the product. Then various tests were conducted on the joints, such as tensile strength, bending test, microstructural test, and grain size test. And then, with the final results, the physical and mechanical properties were investigated.
Downloads
References
1. T.A.Tabish, 1 T.Abbas, M. Farhan, S. Atiq, T.Z. T.Z.Butt Effect of heat input on microstructure and mechanical
properties of the TIG-welded joints of AISI 304 stainless steel, International Journal of Scientific &
Engineering Research, Volume 5, Issue 7, July 2014.
2. Benjamin Joseph, D. Katherasan, P. Sathiya*, and C. V. Srinivasa Murthy. Weld metal characterization
of 316L (N) austenitic stainless steel by electron beam welding process. International Journal of Engineering,
Science and Technology, Vol. 4, No. 2, 2012.
3. S. L. Jeng 1; 2, H. T. Lee 1; T. E. Weirich 3; and W. P. Rebach Micro structural Study of the Dissimilar Joints
of Alloy 690and SUS 304L Stainless Steel Materials Transactions, Vol. 48, No. 3 (2007), pp. 481 to 489
2007.
4. Jun Yan, Ming Gao, Xiaoyan Zen Study on microstructure and mechanical properties of 304stainless steel
joints by TIG, laser, and laserTIG hybrid welding Division of Laser Science and Technology.
5. Radha Raman Mishra1, Vishnu Kumar Tiwari2, and Rajesh S1. A study of tensile strength of mig and tig
welded dissimilar joints of mild steel and stainless steel International Journal of Advances in Materials
Science and Engineering (IJAMSE) Vol. 3, No. 2, April 2014.
6. K.Monika Monika, M.Bala Chennaiah , Dr.P.Nanda Kumar , Dr.K.Prahalada Rao4, V.R.Siddhartha The Effect of
Heat input on the Mechanical Properties of MIG Welded Dissimilar Joints International Journal of
Engineering Research & Technology, Vol. 2, Issue 9, September 2013
7. Raveendra A1 , Dr. B.V.R. Ravi Kumar 2, Dr. A. Sivakumar 3, and V. Prathvi Kumar Reddy Influence of
Welding Parameters On Weld Characteristics Of 5052 Aluminum Alloy sheet Using TIG Welding
International Journal of Application or Innovation in Engineering & Management (IJAIEM) Volume 3, Issue
3, March 2014.
8. Mr.L.Suresh Kumar1 , Dr.S.M.Verma2 Verma2, P.RadhakrishnaPrasad3 Prasad3, P.Kiran Kumar4, Dr.T.Siva
Shanker5Experimental Investigation for Welding Aspects of AISI 304 & 316 by Taguchi Technique for the
Process of TIG & MIG Welding International Journal of Engineering Trends and TechnologyVolume2Issue2- 2011
9. B. Mishra1, R.R. Panda1 and D. K. Mohanta2—Metal Inert Gas (Mig) Welding Parameters Optimization
,vol 2 ,2014
10. Raghuram Pradhan*, Krishna Prasad K.M., SD Asif, Sai Krishna G., Rama Krishna A., and Muruthy D.S.S. Experimental investigation and comparative study ofmig &tig welding on ss202 and ss410 materials
International journal of recent scientific research research, vol. 10, issue 04(a), pp. 31678-31683, April 2019.
11. Mohit Singhmar1* and Nishant Verma1: Experimental study for welding aspects of austenitic stainless
steel (AISI 410) on tensile strength by taguchi technique, vol. 4, no. 1, january 2015
12. Y.S. Tarng and W. H. Yang, -Materials and Manufacturing Processes, Vol. 13, No. 3, 455-467, 1998 Application of the Taguchi Method to the Optimization of the Submerged Arc Welding Process
13. Mohammad Azharuddin: Parametric Optimization of MIG Welding Using Taguchi Method 2016
14. Pappu Kumar: Optimization of Welding Parameter (Mig Welding) Using Taguchi Method ,
Volume||4||Issue||11||November-2016|, International journal of scientific research and development.
15. S. V. Sapakal¹, M. T. Telsang²- PARAMETRIC OPTIMIZATION OF MIG WELDING USING TAGUCHI
DESIGN METHOD, IJAERS/Vol. I/Issue IV/July-Sept. 2012
16. Sahil Garg*, Nitin Bhati*, Chandra Vikram Singh*, Dr. Satpal Sharma*- Application of Taguchi Method to
Determine MIG Welding Parameters for AISI 102
17. Nabendu Ghosh*a, Pradip Kumar Palb, and Goutam Nandi: Parametric Optimization of MIG Welding on 316L
Austenitic Stainless Steel by Grey-Based Taguchi Method , Global Colloquium in Recent Advancement and
Effectual Research in Engineering, Science and Technology (RAEREST 2016)
18. Xiaoyi Yang, Hui Chen⁎, Zongtao Zhu, Chuang Cai⁎, Chengzhu Zhan: Effect of shielding gas flow on
welding process of laser-arc hybrid welding and MIG welding , Journal of Manufacturing Processes (2019)
19. Chetan A.Somani Somani, D I Lalwani: Experimental investigation of tig and mig hybrid welding process on
austentic stainless steel, icmpc-2019
20. Jiankang Huanga, Huizi Chena, Jing Heb, Shurong Yuc, Wei Pana, and Ding Fan—Narrow gap
applications of swing TIG-MIG hybrid weldings, 2019
21. Saurav Datta, Asish Bandyopadhyay & Pradip Kumar; “Application of Taguchi philosophy for parametric
optimization of bead geometry and HAZ width in submerged arc welding using a mixture of fresh flux and
fused flux”
22. Sourav Datta, Ajay Biswas, Gautam Majumdar; “ Sensitivity analysis for relative importance of different
weld quality indicator influencing optimal process condition of Submerged Arc Welding using gray-based
Taguchi Method," Vol. 10, 2009.
23. H.J. Park, D.C. Kim, M.J. Kang, S. Rhee; “Optimisation of the wire feed rate during pulse MIG welding of
Al sheets.” Journal of Achievements in Materials and Manufacturing Engineering Volume 27, by
International OCSCO world.
24. P.Sathiya, Swati, V.Manaswini, Anubha Singh Bhadauria and Snigdha Lakra; “ Optimizing The Gas Metal
Arc Welding Parameter Of Super Austenitic Stainless Steel By Grey-Based Taguchi’s Method”.
25. K. Kishore, P. V. Gopal Krishna, K. Veladri and Syed Qasi Ali; “ Analysis of defects in gas-shielded arc
welding of AISI1040 steel using the Taguchi method.” ARPN Journal of
26. Engineering and Applied Sciences, Vol. 5, No. 1.
27. K.Y. Benyounis, A.G. Olabi; “Optimization of different welding processes using statistical and numerical
approaches—A reference guide,2008.
28. N.B. Mostafa, M.N. Khajavi; "Optimization of welding parameters for weld penetration in FCAW”
Achievements in Materials and Manufacturing Engineering, 2006.
29. Serdar Karaoglu and Abdullah Seçgin, “Sensitivity analysis of submerged arc welding process parameters.”
, volume 2, 2008.
30. Ugur R. Eşme, “Application of Taguchi method for the optimization of resistance spot welding process.”
The Arabian Journal for Science and Engineering, Volume 34.
31. Fontana MG. Corrosion Engineering, 1986.
32. Kadhim FS. Investigation of Carbon Steel Corrosion in Water Base Drilling Mud, 2011.
33. Haque MM, Limon SA, Moniruzzaman M, Bepari MMA. Corrosion comparison of galvanized steel and aluminum in aqueous environments, 2014.
34. Ridha M, Fonna S, Huzni S, Supardi J, Ariffin AK. Atmospheric corrosion ofstructural steels exposed in the
2004 tsunami-affected areas of Aceh. Rust Pitting, Abd Razak, 2014.
35. Funderburk RS. Key concepts in welding engineering. Welding Innovation., 1999.
36. Charde N. Characterization of spot weld growth on dissimilar joints with different thicknesses. Journal of
Mechanical Engineering and Sciences, 2012.
37. Davis JR. Basic understanding of weld corrosion, corrosion of weldments, 2006.
38. Fushimi K, Naganuma A, Azumi K, Kawahara Y. Current distribution during galvanic corrosion of carbin
steel welded with Type-309 stainless steel in NaCl solution, 2008.
39. Uhlig HH. Corrosion and Corrosion Control, 1963.
40. Charde N. Effects of electrode deformation of resistance spot welding on 304 austenitic stainless steel weld
geometry, 2012.
41. Ishak M, Shah LH, Aisha ISR, Hafizi W, Islam MR. Study of resistance spot welding between AISI 301 stainless steel and AISI 1020 carbon steel dissimilar alloys, 2014.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 AUTHOR
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
