Utilization of Effective Leakage flux using Wireless Power Transmission in Induction Stove
DOI:
https://doi.org/10.61841/bqx7sq41Keywords:
Alternating Current (AC), Electric Power Research Institute (EPRI), Electro-Magnetic Induction (EMI), Magneto Motive Force (MMF), Wireless Power Transmission (WPT)Abstract
This paper implements the concept of Wireless Power Transfer (WPT) between the two coils related to the induction stove. At the time of cooking, the oscillating magnetic flux in the induction stove used to cook the food. Here a thin circularly wounded flat coil kept in between the induction stove and the cookware. So, EMF gets induced in a coil based on Faraday’s law of an Electro-Magnetic Induction (EMI). This Electro-Motive Force (EMF) used to charge a battery that can be used as an emergency power source or directly connected to the load. Also, the leakage flux of the induction stove is utilized by a load with the help of a flattened copper coil. This prototype also explains the WPT and gives an idea in real-time applications
Downloads
References
1] A Hybrid Model of Induction Stove Ms. Elizabeth Sherine, Ranjit Singh, Milind Kumar AP/ EIE Department,
Sathyabama University, Chennai, India. Student in EIE Department, Sathyabama University, Chennai, India.
[2] C. Carretero, R. Alonso, J. Acero, and J. M. Burdio, “Optimized 4- coil inductor system arrangement for
induction heating appliances,” in IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics
Society, pp. 004 948–004 952, Nov. 2015.
[3] Design and Comparison of Conductor Size for Induction Cooker coil me mekhaing, soesandaraung, ISSN 2319-
8885 Vol. 03, Issue.07, May-2014,
[4] D. Thrimawithana, U. Madawala, A. Francis, and M. Neath, “Magnetic modeling of a high-power three-phase
bi-directional IPT system,” in 37th Annual Conference on IEEE Industrial Electronics Society (IECON 2011),
2011, pp. 1414–1419.
[5] G. Elliott, S. Raabe, G. Covic, and J. Boys, “Multiphase pickups for large lateral tolerance contactless powertransfer systems,” IEEE Transactions on Industrial Electronics, vol. 57, no. 5, pp. 1590–1598, May 2010.
[6] M. Budhia, G. Covic, J. Boys, and C.-Y. Huang, “Development and evaluation of single-sided flux couplers for
contactless electric vehicle charging,” In IEEE Energy Conversion Congress and Exposition (ECCE 2011),
2011, pp. 614–621.
[7] M.Budhia, G. Covic, and J. Boys, “Magnetic design of a three-phase inductive power transfer system for
roadway powered electric vehicles,” In IEEE Vehicle Power and Propulsion Conference (VPPC 2010), 2010,
pp. 1–6.
[8] MeMeKhaing, SoeSandar Aung, “Design and Comparison of Conductor Size for Induction Cooker Coil
International Journal of Scientific Engineering and Technology Research,” Volume.03, issue. 07, May-2014,
Pages: 1240-1244.
[9] Induction Cooking Technology Design and Assessment Micah Sweeney, Jeff Dols, Brian Fortenbery, and Frank
Sharp Electric Power Research Institute (EPRI) .
[10] J. Huh, S. Lee, W. Lee, G. Cho, and C. Rim, “narrow-width inductive power transfer system for online electrical
vehicles,” IEEE Transactions on Power Electronics, vol. 26, no. 12, pp. 3666–3679, Dec 2011.
[11] O. Luc´ıa, J. Acero, C. Carretero, and J. Burd´ıo, “Induction heating appliances: Toward more flexible cooking
surfaces,” IEEE Ind. Electron. Mag., vol. 7, no. 3, pp. 35–47, Sep. 2013.
[12] S. Senthilmurugan,” Wireless Power Transfer at Domestic Level Using an Induction Stove” Rekha Chander,
Sneha Pattanaik, C. Cauveri, S. Senthilmurugan SRM Institute of Science and Technology, Chennai, Tamil
Nadu, India.
[13] Vikash Choudhary, Satendar Pal Singh Vikash Kumar and Deepak Prashar, "Wireless Power Transmission: An
Innovative Idea," International Journal of Educational Planning & Administration; Volume 1, Number 3
(2011), pp. 203-210; ISSN 2249-3093.
[14] Nandagopal S., Arunachalam V.P., Karthik S."A novel approach for inter-transaction association rule mining,
Journal of Applied Sciences Research VOL, 8, Issue 7, 2012.
[15] Kannan R., Selvambikai M., Jeena Rajathy I., Ananthi S. Rasayan, A study on structural analysis of
electroplated Nano crystalline nickel based thin films, Journal of Chemistry, Vol 10, issue 4, 2017.
[16] Arunvivek G.K., Maheswaran G., Senthil Kumar S., Senthilkumar M., Bragadeeswaran T. Experimental study
on influence of recycled fresh concrete waste coarse aggregate on properties of concrete. International Journal
of Applied Engineering Research, Vol 10, issue 11, 2015
[17] Krishna S.K., Sathya M. Usage of nanoparticle as adsorbent in adsorption process. A review International
Journal of Applied Chemistry, vol 11, Issue 2, 2015.
[18] Sudha S., Manimegalai B., Thirumoorthy P. A study on routing approach for in-network aggregation in wireless
sensor networks, International Conference on Computer Communication and Informatics: Ushering in
Technologies of Tomorrow, Today, ICCCI 2014.
[19] Satheesh A., Jeyageetha V. Improving power system stability with facts controller using certain intelligent
techniques, International Journal of Applied Engineering Research, Vol 9, no 23, 2014.
[20] Ashok V., Kumar N, Determination of blood glucose concentration by using wavelet transform and neural
networks, Iranian Journal of Medical Sciences, Vol 38, Issue 1, 2013.
[21] Somasundaram K., Saritha S., Ramesh K, Enhancement of network lifetime by improving the leach protocol for
large scale WSN, Indian Journal of Science and Technology, Vol 9, Issue 16, 2016.
[22] Jayavel S., Arumugam S., Singh B., Pandey P., Giri A., Sharma A. Use of Artificial Intelligence in automation
of sequential steps of software development / production, Journal of Theoretical and Applied Information
Technology, Vol 57, Issue 3, 2013.
[23] Ramesh Kumar K.A., Balamurugan K., Gnanaraj D., Ilangovan S, Investigations on the effect of flyash on the
SiC reinforced aluminium metal matrix composites, Advanced Composites Letters, Vol 23, Issue 3, 2014
[24] Suresh V.M., Karthikeswaran D., Sudha V.M., Murali Chandraseker D, Web server load balancing using SSL
back-end forwarding method. IEEE-International Conference on Advances in Engineering, Science and
Management, ICAESM-2012, 2012.
[25] Karthikeswaran D., Sudha V.M., Suresh V.M., Javed Sultan A, A pattern based framework for privacy
preservation through association rule mining, IEEE-International Conference on Advances in Engineering,
Science and Management, ICAESM-2012, 2012.
[26] Senthil J., Arumugam S., Shah P, Real time automatic code generation using generative programming paradigm,
European Journal of Scientific Research, vol. 78, issue 4, 2012.
[27] Vijayakumar J., Arumugam S, Certain investigations on foot rot disease for betelvine plants using digital
imaging technique, Proceedings - 2013 International Conference on Emerging Trends in Communication,
Control, Signal Processing and Computing Applications, IEEE-C2SPCA", 2013.
[28] Vijayakumar J., Arumugam S. Odium piperis fungus identification for piper betel plants using digital image
processing, Journal of Theoretical and Applied Information Technology, vol 60, issue 2, 2014.
[29] Manchula A., Arumugam S, Face and fingerprint biometric fusion: Multimodal feature template matching
algorithm, International Journal of Applied Engineering Research, vol 9, issue 22, 2014.
[30] Ramesh Kumar K.A., Balamurugan K., Arungalai Vendan S., Bensam Raj J, Investigations on thermal
properties, stress and deformation of Al/SiC metal matrix composite based on finite element method. Carbon -
Science and Technology, Vol 6, Issue 3, 2014.
[31] Kanchana A., Arumugam S, Palm print texture recognition using connected-section morphological
segmentation, Asian Journal of Information Technology Vol 6, Issue 3, 2014.
[32] Padmapriya R., Thangavelu P, Characterization of nearly open sets using fuzzy sets, Global Journal of Pure and
Applied Mathematics, vol 11, issue 1, 2015.
[33] P.B. Narandiran, T. Bragadeeswaran, M. Kamalakannan, V. Aravind, Manufacture of Flyash Brick Using Steel
Slag and Tapioca Powder. Jour of Adv Research in Dynamical & Control Systems, Vol. 10, No. 12, 2018, 527-
[34]
532
R. Girimurugan*, N. Senniangiri, K. Adithya, B. Velliyangiri, Mechanical Behaviour of Coconut Shell
Powder Granule Reinforced Epoxy Resin Matrix Bio Composites, Jour of Adv Research in Dynamical &
Control Systems, Vol. 10, No. 12, 2018, 533-541
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
