Design and Fabrication of Gasification Combined Cycle in Power Plant

Authors

  • Arun V Rejus Kumar Assistant Professor, Department of Mechanical Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai. Author
  • A. Sagai Francis Britto Research Scholar, DST- JRF (INSPIRE Fellow), Department of Mechanical Engineering, BIST, BIHER, Bharath Institute of Higher Education & Research, Selaiyur, Chennai Author

DOI:

https://doi.org/10.61841/g3tq2v67

Keywords:

Power Plant, Gasification Combined, Design and Fabrication.

Abstract

 These days, the major source of electricity in our country is produced from thermal power, i.e., coal. The vast resources of coal we have are not of high carbon content. The form of coal primarily mined in India is lignite, which has less carbon content. We are not being able to maximize the output from the power plants using these coals only because of the inferior quality of coal. As a result, there is much wastage of these valuable resources. 

Downloads

Download data is not yet available.

References

[1] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Virtual instrumentation based process of

agriculture by automation. Middle-East Journal of Scientific Research, 20(12): 2604-2612.

[2] Udayakumar, R., Kaliyamurthie, K.P., & Khanaa, T.K. (2014). Data mining a boon: Predictive system for

university topper women in academia. World Applied Sciences Journal, 29(14): 86-90.

[3] Anbuselvi, S., Rebecca, L.J., Kumar, M.S., & Senthilvelan, T. (2012). GC-MS study of phytochemicals in

black gram using two different organic manures. J Chem Pharm Res., 4, 1246-1250.

[4] Subramanian, A.P., Jaganathan, S.K., Manikandan, A., Pandiaraj, K.N., Gomathi, N., & Supriyanto, E.

(2016). Recent trends in nano-based drug delivery systems for efficient delivery of phytochemicals in

chemotherapy. RSC Advances, 6(54), 48294-48314.

[5] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Partial encryption and partial inference control

based disclosure in effective cost cloud. Middle-East Journal of Scientific Research, 20(12), 2456-2459.

[6] Lingeswaran, K., Prasad Karamcheti, S.S., Gopikrishnan, M., & Ramu, G. (2014). Preparation and

characterization of chemical bath deposited cds thin film for solar cell. Middle-East Journal of Scientific

Research, 20(7), 812-814.

[7] Maruthamani, D., Vadivel, S., Kumaravel, M., Saravanakumar, B., Paul, B., Dhar, S.S., Manikandan, A., &

Ramadoss, G. (2017). Fine cutting edge shaped Bi2O3rods/reduced graphene oxide (RGO) composite for

supercapacitor and visible-light photocatalytic applications. Journal of colloid and interface science, 498,

449-459.

[8] Gopalakrishnan, K., Sundeep Aanand, J., & Udayakumar, R. (2014). Electrical properties of doped

azopolyester. Middle-East Journal of Scientific Research, 20(11). 1402-1412.

[9] Subhashree, A.R., Parameaswari, P.J., Shanthi, B., Revathy, C., & Parijatham, B.O. (2012). The reference

intervals for the haematological parameters in healthy adult population of chennai, southern India. Journal

of Clinical and Diagnostic Research: JCDR, 6(10), 1675-1680.

[10] Niranjan, U., Subramanyam, R.B.V., & Khanaa, V. (2010, September). Developing a web recommendation

system based on closed sequential patterns. In International Conference on Advances in Information and

Communication Technologies, 101, 171-179. Springer, Berlin, Heidelberg.

[11] Slimani, Y., Baykal, A., & Manikandan, A. (2018). Effect of Cr3+ substitution on AC susceptibility of Ba

hexaferrite nanoparticles. Journal of Magnetism and Magnetic Materials, 458, 204-212.

[12] Premkumar, S., Ramu, G., Gunasekaran, S., & Baskar, D. (2014). Solar industrial process heating associated

with thermal energy storage for feed water heating. Middle East Journal of Scientific Research, 20(11),

1686-1688.

[13] Kumar, S.S., Karrunakaran, C.M., Rao, M.R.K., & Balasubramanian, M.P. (2011). Inhibitory effects of

Indigofera aspalathoides on 20-methylcholanthrene-induced chemical carcinogenesis in rats. Journal of

carcinogenesis, 10.

[14] Beula Devamalar, P.M., Thulasi Bai, V., & Srivatsa, S.K. (2009). Design and architecture of real time webcentric tele health diabetes diagnosis expert system. International Journal of Medical Engineering and

Informatics, 1(3), 307-317.

[15] Ravichandran, A.T., Srinivas, J., Karthick, R., Manikandan, A., & Baykal, A. (2018). Facile combustion

synthesis, structural, morphological, optical and antibacterial studies of Bi1− xAlxFeO3 (0.0≤ x≤ 0.15)

nanoparticles. Ceramics International, 44(11), 13247-13252.

[16] Thovhogi, N., Park, E., Manikandan, E., Maaza, M., & Gurib-Fakim, A. (2016). Physical properties of CdO

nanoparticles synthesized by green chemistry via Hibiscus Sabdariffa flower extract. Journal of Alloys and

Compounds, 655, 314-320.

[17] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2014). Wide area wireless networks-IETF. Middle-East

Journal of Scientific Research, 20(12), 2042-2046.

[18] Sundar Raj, M., Saravanan, T., & Srinivasan, V. (2014). Design of silicon-carbide based cascaded

multilevel inverter. Middle-East Journal of Scientific Research, 20(12), 1785- 1791.

[19] Achudhan, M., Jayakumar M.P. (2014). Mathematical modeling and control of an electrically-heated

catalyst. International Journal of Applied Engineering Research, 9(23), 23013.

[20] Thooyamani, K.P., Khanaa, V., & Udayakumar, R. (2013). Application of pattern recognition for farsi

license plate recognition. Middle-East Journal of Scientific Research, 18(12), 1768-1774.

[21] Jebaraj, S., Iniyan S. (2006). Renewable energy programmes in India. International Journal of Global

Energy Issues, 26(43528), 232-257.

[22] Sharmila, S., & Jeyanthi Rebecca, L. (2013). Md Saduzzaman., Biodegradation of domestic effluent using

different solvent extracts of Murraya koenigii. J Chem and Pharm Res, 5(2), 279-282.

[23] Asiri, S., Sertkol, M., Guner, S., Gungunes, H., Batoo, K.M., Saleh, T.A., Manikandan A., & Baykal, A.

(2018). Hydrothermal synthesis of CoyZnyMn1-2yFe2O4 nanoferrites: magneto-optical

investigation. Ceramics International, 44(5), 5751-5759.

[24] Rani, A.J., & Mythili, S.V. (2014). Study on total antioxidant status in relation to oxidative stress in type 2

diabetes mellitus. Journal of clinical and diagnostic research: JCDR, 8(3), 108-110.

[25] Karthik, B. (2014). Arulselvi, Noise removal using mixtures of projected gaussian scale mixtures. MiddleEast Journal of Scientific Research, 20(12), 2335-2340.

[26] Karthik, B., Arulselvi, & Selvaraj, A. (2014). Test data compression architecture for low power VLSI

testing. Middle - East Journal of Scientific Research, 20(12), 2331-2334.

[27] Vijayaragavan, S.P., Karthik, B., & Kiran Kumar, T.V.U. (2014). Privacy conscious screening framework

for frequently moving objects. Middle-East Journal of Scientific Research, 20(8), 1000-1005.

[28] Kaliyamurthie, K.P., Parameswari, D., & Udayakumar, R. (2013). QOS aware privacy preserving location

monitoring in wireless sensor network. Indian Journal of Science and Technology, 6(5), 4648-4652.

[29] Silambarasu, A., Manikandan, A., & Balakrishnan, K. (2017). Room-temperature superparamagnetism and

enhanced photocatalytic activity of magnetically reusable spinel ZnFe 2 O 4 nanocatalysts. Journal of

Superconductivity and Novel Magnetism, 30(9), 2631-2640.

[30] Jasmin, M., Vigneshwaran, T., & Beulah Hemalatha, S. (2015). Design of power aware on chip embedded

memory based FSM encoding in FPGA. International Journal of Applied Engineering Research, 10(2),

4487-4496.

[31] Philomina, S., & Karthik, B. (2014). Wi-Fi energy meter implementation using embedded linux in ARM

9. Middle-East Journal of Scientific Research, 20, 2434-2438.

[32] Vijayaragavan, S.P., Karthik, B., & Kiran Kumar, T.V.U. (2014). A DFIG based wind generation system

with unbalanced stator and grid condition. Middle-East Journal of Scientific Research, 20(8), 913-917.

[33] Rajakumari, S.B., & Nalini, C. (2014). An efficient data mining dataset preparation using aggregation in

relational database. Indian Journal of Science and Technology, 7, 44-46.

[34] Karthik, B., Kiran Kumar, T.V.U., Vijayaragavan, P., & Bharath Kumaran, E. (2013). Design of a digital

PLL using 0.35 μm CMOS technology. Middle-East Journal of Scientific Research, 18(12), 1803-1806.

[35] Sudhakara, P., Jagadeesh, D., Wang, Y., Prasad, C.V., Devi, A.K., Balakrishnan, G., Kim B.S., & Song, J.I.

(2013). Fabrication of Borassus fruit lignocellulose fiber/PP composites and comparison with jute, sisal and

coir fibers. Carbohydrate polymers, 98(1), 1002-1010.

[36] Kanniga, E., & Sundararajan, M. (2011). Modelling and characterization of DCO using pass transistors.

In Future Intelligent Information Systems, 86(1), 451-457. Springer, Berlin, Heidelberg.

[37] Sachithanandam, P., Meikandaan, T.P., & Srividya, T. Steel framed multi storey residential building

analysis and design. International Journal of Applied Engineering Research, 9(22), 5527-5529.

[38] Kaliyamurthie, K.P., Udayakumar, R., Parameswari, D., & Mugunthan, S.N. (2013). Highly secured online

voting system over network. Indian Journal of Science and Technology, 6(S6), 4831-4836.

[39] Sathyaseelan, B., Manikandan, E., Lakshmanan, V., Baskaran, I., Sivakumar, K., Ladchumananandasivam,

R., Kennedy, J., & Maaza, M. (2016). Structural, optical and morphological properties of post-growth

calcined TiO2 nanopowder for opto-electronic device application: Ex-situ studies. Journal of Alloys and

Compounds, 671, 486-492.

[40] Saravanan, T., Sundar Raj M., & Gopalakrishnan K. (2014). SMES technology, SMES and facts system,

applications, advantages and technical limitations. Middle - East Journal of Scientific Research, 20(11),

1353-1358.

[41] Priyambiga, R., & Shanthi, D. (2014). Diverse Relevance Ranking in Web Scrapping for Multimedia

Answering. International Journal of System Design and Information Processing, 2(2), 34-39.

[42] Rasool, Z., Tariq, W., Ir. Dr. Othman, M.L., & Dr.Jasni, J.bt. (2019). What Building Management System

Can Offer to Reduce Power Wastage both Social and Economical: Brief Discussion by Taking Malaysian

Power Infrastructure as a Sample. The SIJ Transactions on Advances in Space Research & Earth

Exploration, 7(1), 1-5.

[43] Taylor and Jin, B. (2016). A Complete Review on Various Noises and Recent Developments in Denoising

Filters. Bonfring International Journal of Power Systems and Integrated Circuits, 6(4), 22-29.

[44] Sethi, G., Shaw, S., Jyothi, B., & Chakravorty, C. (2014). Performance Analysis of Wi-MAX Networking

Modulation Scheme. International Scientific Journal on Science Engineering & Technology, 17(9), 882-

885.

[45] Achar, R.K., SwagathBabu, M., & Dr.Arun, M. (2014). Border Gateway Protocol Performance and Its

Protection against Disturbed Denial of Service Attack. Bonfring International Journal of Research in

Communication Engineering, 4(1), 5-9.

[46] Phadke, S. (2013). The Importance of a Biometric Authentication System. The SIJ Transactions on

Computer Science Engineering & its Applications, 1(4), 18-22.

[47] Sangeetha, N., Dr.Gopinath, B., Muthulakshmi, S., Dr.Kalayanasundram, M., & Suriya, G. (2018). A New

Approach to Single Phase AC Microgrid System Using UPQC Device. Bonfring International Journal of

Software Engineering and Soft Computing, 8(2), 26-34.

[48] Sonam Vohra, R., & Dr. Sawhney, R.S. (2014).Dynamic Routing Protocols Analysis based on Dissimilar

Number of Packets. The SIJ Transactions on Computer Networks & Communication Engineering (CNCE),

2(3), 1-6.

[49] Prabhakar, E., & Sugashini, K. (2018).New Ensemble Approach to Analyze User Sentiments from Social

Media Twitter Data. The SIJ Transactions on Industrial, Financial & Business Management (IFBM), 6(3),

7-11.

[50] Aruna, K.B., LallithaShri, A., Aravindh, Jayakumar& Jayasurya, (2017). Protection for Multi Owner Data

Sharing Scheme. Bonfring International Journal of Advances in Image Processing, 7(1), 01-05.

Downloads

Published

31.10.2019

How to Cite

Rejus Kumar, A. V., & Francis Britto, A. S. (2019). Design and Fabrication of Gasification Combined Cycle in Power Plant. International Journal of Psychosocial Rehabilitation, 23(4), 254-264. https://doi.org/10.61841/g3tq2v67