An Experimental Investigation on Replacement of Aggregate with Hdpein Absorbent Pavements
DOI:
https://doi.org/10.61841/hn62v528Keywords:
HDPE (Highly Density PolyEthelene) HDPE Plasticaggregates, Rigid Pavement.Abstract
The paper reports "An experimental investigation on replacement of aggregate with HDPE plastic waste in rigidpavement,t" in which the natural aggregate is partially replaced by the HDPE waste HDPE plastic in the permeable pavement. The main objective of this project is to use the waste HDPE plastic in an efficient way in the construction of roadpavement,t which leads to a green ecosystem. Permeable pavements help in improving the flow of water, groundwaterrecharge,e andincreasing thee lifetime of pavement. By using the HDPE plastic as an aggregate in theconcrete,e reduce the cost and weight of the pavement. Waste HDPE plastic ofpellets shape was used as a partial replacement for aggregateby 100%, 20%, 30%, 40%, and 50% with concrete mixture. All of the concretemixtures weree tested at room temperature. The test includes performing slump, compressive strength, flexural strengths, and split tensile strength. Curing ages 7,14, and, 28 days for the concrete mixture were applied in this work. This observation of investigation illustrates that reducing waste HDPE plastic as a natural aggregate substitution in concert gives a good approach to reduce the cost of material and solve some of the solid waste problems posed by HDPE plastic.
Downloads
References
[1] Aman Khimta, “Use Of Waste HDPE plastic In Bituminous Concrete”
[2] Manoj Chopra, Marty Wanielista, “Compressive Strength of Pervious Concrete Pavements”
[3] A. M. AmdeAndS. Rogge, “Development Of High Quality Pervious Concrete Specifications For Maryland
Conditions”
[4] Pratiksha Singh Rajput,R. K. Yadav“Use of HDPE plastic Waste in Bituminous Road Construction”,
International Journal of Science Technology & Engineering | Volume 1
[5] Mr. Rahul Jichkar, Shubhamingale, et al “Comparison in Strength of Pervious Concrete Block by Using
Natural aggregates and HDPE plastic Coated aggregates,” International Research Journal of Engineering
and Technology (IRJET).
[6] A.A.M. Sharif, s shahidan, et al “Strength development of pervious concrete containing engineered biomass
aggregate”
[7] Jibrael and Peter, J Ecosys Ecograph 2016, “Strength and Behavior of Concrete Contains Waste HDPE
plastic”.
[8] Pratiksha Singh Rajput, R. K. Yadav, “Effect of HDPE plastic Waste on Properties of Road Aggregate”
International Journal for Innovative Research in Science & Technology| Volume 2.
[9] Nivetha. R, Keerthikumar. B, et al, “Experimental investigation of rigid pavement using demolished waste”
International Research Journal of Engineering and Technology (IRJET).
[10] Dr.E.K. Mohanraj, Dr. S. Kandasamy and N. Rajkumar, Study on Concrete using Waste Materials by Partial
Replacement of Aggregates to reduce Global Warming Gases, Indian Journal of Science and Technology,
2011 Vol:04, No: 03, pp.159-163.
[11] Anzar Hamid Mir, “Use of HDPE plastic Waste in Pavement Construction: An Example of Creative Waste
management” IOSR Journal of Engineering (IOSRJEN).
[12] Silvia Priscila,S., and Dr. Hemalatha, M. (2018). Heart Disease Prediction Using Integer-Coded Genetic
Algorithm (ICGA) Based Particle Clonal Neural Network (ICGA-PCNN). Bonfring International Journal of
Industrial Engineering and Management Science, 8(2), 15TO19.
[13] Sharifzadeh, M. (2015). The Survey of Artificial Neural Networks-Based Intrusion Detection Systems.
International Academic Journal of Science and Engineering, 2(4), 11-18.
[14] Rajavenkatesan, T., Mohanasundaram, C., Ajith, A.S., &Vignesh, P. (2017). Photo Voltaic Cooling Can.
International Journal of Communication and Computer Technologies, 5(1), 17-22.
[15] Gowshika, E., &Sivakumar, S. (2017). Smart LPG Monitoring and Controlling System. International
Journal of Communication and Computer Technologies, 5(1), 23-26.
[16] Soorya, B., Shamini, S.S., &Sangeetha, K. (2017). VLSI Implementation of Lossless Video Compression
Technique Using New Cross Diamond Search Algorithm. International Journal of Communication and
Computer Technologies, 5(1), 27-31.
[17] Bennet A., Sankaranarayanan, Kandasamy R., Aruna, Kavitha, Thamizhoviya.(2016). Performance
evaluation of enhancing the capacity of spectrum sharing cognitive radio networks. IIOAB Journal, 7(9).
[18] Kumar P.R., Santhakumar K., Palani S. (2016). An intelligent approach for optimizing Energy consumption
and Schedule length of Embedded multiprocessors 1. Journal of Intelligent and Fuzzy Systems,
31(1).
[19] Arthy G., Marimuthu C.N. (2016). Immune RBF neural network algorithm for DSTATCOM. 2016
International Conference on Computer Communication and Informatics, ICCCI 2016.
[20] Somasundaram K., Saritha S., Ramesh K. (2016). Enhancement of network lifetime by improving the leach
protocol for large scale WSN. Indian Journal of Science and Technology, 9(16).
[21] Sukumar P., Gnanamurthy R.K. (2016). Computer aided detection of cervical cancer using pap smear
images based on adaptive neuro fuzzy inference system classifier. Journal of Medical Imaging and Health
Informatics, 6(2).
[22] Thangavelu S.K., Kasthuri N., Sundaram V., Aravind N., Bilakanti N. (2016). A stand-alone EEG
monitoring system for remote diagnosis. Telemedicine and e-Health, 22(4).
[23] Sengottaian S., Natesan S., Mathivanan S. (2017). Weighted delta factor cluster ensemble algorithm for
categorical data clustering in data mining. International Arab Journal of Information Technology, 14(3).
[24] Upendra Roy B.P., Rengarajan N. (2017). Feasibility Study of an Energy Storage System for Distributed
Generation System in Islanding Mode. Journal of Energy Resources Technology, 139(1).
[25] Arthy G., Marimuthu C.N. (2018). A novel center-tapped transformer based multilevel inverter with
common DC source. Journal of Vibro engineering, 20(8).
[26] Jagan K., Sivasankaran S., Bhuvaneswari M., Rajan S. (2018). Effect of second order slip and non-linear
thermal radiation on mixed convection flow of MHD Jeffrey nanofluid with double stratification under
convective boundary condition. IOP Conference Series: Materials Science and Engineering, 390(1).
[27] Khed V.C., Mohammed B.S., Liew M.S., Alaloul W.S., Adamu M., Al-Fakih A., Karthikeyan J. (2018).
Experimental investigation on pullout strength of hybrid reinforcement of fibre in rubberized cementitious
composites. International Journal of Civil Engineering and Technology, 9(7).
[28] Deepa A., Marimuthu C.N. (2018). Modified RS encoder architecture with reduced critical path delay for
high speed data communication. Proceedings of the International Conference on Intelligent Sustainable
Systems, ICISS 2017.
[29] Kumar, S. S., Kasthuri, N., & Ashok, V. (2010, December). Blood flow analysis using euclidean distance
algorithm and discrete wavelet transform. In 2010 International Conference on Communication and
Computational Intelligence (INCOCCI) (pp. 330-335). IEEE.
[30] Vijaya, G., &Arumugam, S. (2010). Utilization of Statistical Process Control in Defined Level Software
Companies to Manage Processes Using Control Charts with Three Sigma. In Proceedings of the World
Congress on Engineering and Computer Science (Vol. 1).
[31] Rathinavel, S., &Arumugam, S. (2011). Shoe print recognition based on redundant discrete wavelet
transform and support vector machine. European Journal of Scientific Research, 65(3), 312.
[32] Rameshkumar, A., &Arumugam, S. (2011). An analysis of linear and non linear controller on quasi resonant
buck converter.European Journal of Scientific Research, 66(1)
[33] Bennet M.A., Raglend I.J. (2011). Performance analysis of block artifact reduction scheme using pseudo
random noise mask filtering. European Journal of Scientific Research, 66(1)
[34] Satheesh, A., &Manigandan, T. (2012). Hybrid Technique for Maintaining Power Stability Using Multiple
FACTS Controller. Journal Of Information &Computational Science, 9(12), 3401-3412.
[35] Mohanraj, V., Chandrasekaran, M., Senthilkumar, J., Arumugam, S., & Suresh, Y. (2012). Ontology driven
bee's foraging approach based self adaptive online recommendation system. Journal of Systems and
Software, 85(11), 2439-2450.
[36] Kavitha, S., &Duraiswamy, K. (2012). Automatic detection of hard exudates from fundus images using
adaptive neuro-fuzzy inference system. Australian Journal of Electrical and Electronics Engineering, 9(3),
315-325.
[37] Ravi, S., Sudha, M., &Balakrishnan, P. A. (2012, May). Design and development of a microcontroller based
neuro fuzzy temperature controller. In 2012 International Conference on Informatics, Electronics & Vision
(ICIEV) (pp. 103-107). IEEE.
[38] Rameshkumar, A., &Arumugam, S. (2012, April). PI Control of Quasi-resonant Buck Converter. In
International Conference on Advances in Information Technology and Mobile Communication (pp. 477-
485). Springer, Berlin, Heidelberg.
[39] Patchainayagi, S., &Banu, S. P. (2013). „The Individual Vs. The Wife‟–The Inner Conflict in the Selected
Characters of Anita Desai & Margaret Laurence. Life Science Journal, 10(3).
[40] Vijayakumar, M., &Banu, S. P. (2013). Diasporic Perceptions and Cultural Disorientations in Jhumpa
Lahiri‟s The Namesake. Life Science Journal, 10(3).
[41] Govindaraj, T., Ravi, S., &Balakrishnan, P. A. (2013, March). Design and development of maximum power
point tracking in wind power optimization using fuzzy PLL controller. In 2013 IEEE International
Conference ON Emerging Trends in Computing, Communication and Nanotechnology (ICECCN) (pp. 384-
389). IEEE.
[42] Siva C., &Arumugam S. (2013). Fast reroute technique in BGP with secure Route Reliability Testing
algorithm. International Review on Computers and Software 8(9):2221-2228.
[43] Prabhu, N., Agilan, S., Muthukumarasamy, N., &Senthilkumaran, C. K. (2013). Effect of Temperature on
the Structural and Optical Properties of WO 3 Nanoparticles Prepared by Solvo Thermal Method. Digest
Journal of Nanomaterials &Biostructures (DJNB), 8(4).
[44] Ramkumar R.P., &Arumugam S. (2013). Improved Iris Segmentation Algorithm without Normalization
Phase. International Journal of Engineering and Technology 5(6):5107-5113.
[45] Gandhi, P. K. (2013, December). Transient stability enhancement of single machine infinite bus system. In
2013 International Conference on Advanced Computing and Communication Systems (pp. 1-6). IEEE.
[46] Rajpriya, G., Ravi, S., & Zaidi, A. M. A. (2013, December). Design and development of MATLAB
Simulink based Selective Harmonic Elimination technique for three phase voltage source inverter. In 2013
International Conference on Advanced Computing and Communication Systems (pp. 1-5). IEEE.
[47] Muthukumar, M., Karthikeyan, P., Lakshminarayanan, V., Senthil Kumar, A. P., Vairavel, M.,
&Girimurugan, R. (2014). Performance studies on pem fuel cell with 2, 3 and 4 pass serpentine flow field
designs. In Applied Mechanics and materials (Vol. 592, pp. 1728-1732). Trans Tech Publications Ltd.
[48] Krishneswari, K., &Arumugam, S. (2014). An Enhanced Backpropagation Neural Network for Multimodal
Biometric System. Computers and Software, 1208.
[49] Prabhu N., Agilan S., Muthukumarasamy N., &Senthil T.S. (2014). Preparation and Characterizations of
Copper doped WO3 Nanoparticles Prepared by Solvo Thermal cum Chemical method. International
Journal of Chem Tech Research 6(7):3487-3490.
[50] Prabhu N., Agilan S., Muthukumarasamy N., &Senthil T.S. (2014). Structural and morphological analysis of
aluminum (Al) doped tungsten oxide (WO3) nanoparticles. International Journal of ChemTech
Research 6(7):3491-3495.
[51] Maithili, G. (2014, March). A novel DC/DC converter for wind turbines with power quality using PQ
algorithm. In 2014 International Conference on Green Computing Communication and Electrical
Engineering (ICGCCEE) (pp. 1-7). IEEE.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Author
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
