Ways to Reduce the Impact of Cotton in the Separator Worker Chamber

Authors

  • Salokhiddinova Makhliyo Nurmukhammad Qizi Department of Technology of Initial Processing Natural Fibers, Author

DOI:

https://doi.org/10.61841/kwzhcx08

Keywords:

Quality, Cotton, Fine Impurities,, Impact Strength, Transport, Damage, Working Chamber, , Impact Strength,, Cleaning, Seeds, Fiber, Pipe

Abstract

The article describes the transfer of cotton to the next technological process while preserving its natural properties during the initial processing process. The analysis of ways to reduce shock forces during the removal of cotton seeds from the air was analyzed. For this purpose it is based on the first cotton processing of cotton.

Downloads

Download data is not yet available.

References

[1] Zikriyoev E.Z. Textbooks under the general editorship. Primary processing of raw cotton, Tashkent. Mehnat, 1999, pp. 258-269.

[2] Muradov R. Ways to improve the efficiency of the cotton separator. Namangan edition, 2005, pp. 62-63.

[3] Muradov R. Cotton Basics of an air carrier to increase the effectiveness of the device. Science. Tashkent, Navuz edition, 2014, pp. 15-16.

[4] Salokhiddinova Makhliyo Nurmukhammadqizi, Muradov Rustam Muradovich, Mamatkulov Arif Tursunovich. Investigation of Separating Small Impurities and Heavy Compounds Using the Cotton Separator Equipment. American Journal of Science, Engineering and Technology. Vol. 2, No. 2, 2017, pp. 72-76.

[5] DzhuraevA., Makkudov R.Kh., Sh.Shukhratov “Improving the designs of the working parts of the cotton separator” J. “Problems of textiles” No. 3-4, 2013, pp.128-131.

[6] Salokhiddinova Makhliyo Nurmukhammadqizi, Muradov Rustam Muradovich, Karimov Abdusamat Ismonovich, Mardonov Botir Mardanovich. The Shortfalls of the Vacuum Valve Cotton Separator. American Journal of Science and Technology. Vol. 5, No. 4, 2018, pp. 49-55.

[7] M.KHAKIMOVA, A.YUSUPOV, M.SALOKHIDDINOVA, R.MURADOV, M.ABDURAKHMANOVA.

Ways to Improve the Effectiveness of Cotton Cleaning Machines. INTERNATIONAL JOURNAL OF ADVANCED RESEARCHIN SCIENCE, ENGINEERING AND TECHNOLOGY. Volume 7, Issue 3, March 2020. pp. 13061-13066

[8] A.Karimov, O.Mamatkulov, M.Salokhiddinova. Investigating the effect of a drum in the efficient operation of the separator. STJ FerPI. 2017, No.3. pp. 160-164.

[9] R.Muradov, O.Mamatkulov, M.Salokhiddinova. Separating small impurities and heavy compounds using the cotton separator. ISCIENCE.IN.UA Actual scientific research in the modern world: ХV Collection of the Faculty of international scientific-practical conference, Pereyaslav-Khmelnitsky// 2016. - No. 7(15), s. 1.

pp. 60-65.

[10] Muradov R.M., Karimov A.I., Mardanov B.M., (2014) Theoretical and Experimental Studies of the Effect of Inclined Scraper on Removal of Raw Cotton from Mesh Surface. World Journal of Mechanics. 4, 371- 377.

[11] Ishlinsky A.Yu. Renting and Drawing in high velocity rates of deformation. Application tasks of mechanics. Book 1, M. Science, 1986, pp.263-269.

Downloads

Published

30.06.2020

How to Cite

Nurmukhammad Qizi, S. M. (2020). Ways to Reduce the Impact of Cotton in the Separator Worker Chamber. International Journal of Psychosocial Rehabilitation, 24(4), 6494-6501. https://doi.org/10.61841/kwzhcx08