Performance Evaluation of Bimetallic Piston
DOI:
https://doi.org/10.61841/cw9q9y31Keywords:
Bimetallic Piston, Finite, Ultrasonic, FundamentalAbstract
Bimetallic pistons are most generally utilized in diesel motor vehicles for weight decrease and improved execution with long life. Aluminum composite is strengthened with cast iron addition to understand the bimetallic pistons. The holding among aluminum and cast iron is accomplished through a protected procedure named the Al-Balance process. To guarantee better holding, the addition is dunked in the liquid aluminum shower, this plunging time assuming a fundamental job. The present investigation centers on shifting the plunging time from 90 s to 5 min to and the ideal plunging time. Accomplishing the close to net state of the bimetallic pistons without harming the holding between the aluminum and cast iron is the significant test. This examination additionally gets ideal cutting parameters in killing such pistons with cubic boron nitride as a solitary device to machine the metal. The bond trustworthiness subsequent to machining is basically identified with the extent of the cutting powers.
Downloads
References
[1] M. Uthayakumar, J.V. Sivaprasad, G. Prabhaharan,(2008), “Machining Studies on Bimetallic Pistons with CBN Tool Using the Taguchi Method – Technical Communication”, Machining Science and Technology, Volume 12, 2008-Issue 2.
[2] Aditi Gupta, Bundet Boekfa, Hidehiro Sakurai, Masahiro Ehara, and U. Deva Priyakumar,(2016), “Structure, Interaction, and Dynamics of Au/Pd Bimetallic Nanoalloys Dispersed in Aqueous Ethylpyrrolidone, a Monomeric Moiety of Polyvinylpyrrolidone”, See https://pubs.acs.org/sharing guidelines for options on how to legitimately share published articles. J. Phys. Chem. C 2016, 120, 17454−17464
[3] Uthayakumar, M., Prabhakaran, G., Aravindan, S., Sivaprasad, J.,V., 2012, Influence of Cutting Force on Bimetallic Piston Machining by a Cubic Boron Nitride (CBN) Tool, Materials and Manufacturing Processes, 27:1078-1083.
[4] DeovratVibhandik, Ameya Pradhan, Sampada Mhaskar, Nikita Sukthankar, Atul Dhale, (2014), Design Analysis and Optimization of Piston and Determination of its Thermal Stresses Using CAE Tools, 3(5), pp. 273-277.
[5] Swati S. Chougule, Vinayak H. Khatawate, (2013), Piston Strength Analysis Using FEM, International Journal of Engineering Research and Applications, 3, pp.124-126
[6] R.C. Singh, Roop. Lal, Ranganath M. S., Rajiv Chaudhary, (2014), Failure of Piston in IC Engines: A Review, IJMER, 4.
[7] Mia M, Dhar NR. Optimization of surface roughness and cutting temperature in high-pressure coolant- assisted hard turning using Taguchi method. International Journal of Advanced Manufacturing Technology. 2016. DOI: 10.1007/s00170-016- 8810-2
[8] Al Bashir M, Mia M, Dhar NR. Investigations on Surface Milling of Hardened AISI 4140 Steel with Pulse Jet MQL Applicator. Journal of the Institution of Engineers (India): Series C. 2016. DOI: 10.1007/s40032- 016-0277-2
[9] Li, C.A., 2012, "Effect of Si content in hot dipping aluminium bath on Al–Fe bonding layer of aluminium piston with reinforced cast iron ring," Materials science and technology, 28(8), pp. 953-958.
[10] Salimi, M., Malekan, M., Nami, B., and Hoseiny, H., 2017, "Microstructure characteristics and mechanical properties of the interface layer of coated steel insert-aluminum bimetals," Journal of Materials Research, 32(4), pp. 874-882.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
